Table of Contents
Advertisement
Examples
v Clears the stylesheet cache of the mgr1 XML Manager.
cli remote open
Establishes a TCP/IP connection to a specific remote host.
Syntax
cli remote open address port
Parameters
address Specifies the IP address of the remote host.
port
Guidelines
The cli remote open command establishes a TCP/IP session between the appliance
and a remote site, but only at explicit initiation of an the admin or a privileged
user. This command does not provide a back door to the appliance.
This command provides a command shell to a remote host that allows offsite
technicians to access a appliance that is protected by a firewall or other security
measures.
This command provides the same function as the cli telnet command, but provides
the function from a remote host.
Related Commands
cli telnet
Examples
v Establishes an appliance-initiated TCP/IP connection between the DataPower
cli telnet
Enters Telnet Service configuration mode, or creates a Telnet service for
client-initiated access to the command line.
Syntax
cli telnet name
cli telnet name [0 | telnetServerIP] telnetServerPort [telnetClientIP clientMask]
no cli telnet name
# clear xsl cache mgr1
Cleared cache of xmlmgr mgr1
#
Identifies the port on the remote host that monitors CLI traffic. Use an
integer in the range of 0 through 65535.
appliance and the remote host (192.168.32.101:64999) and provides the remote
host with a command shell.
# cli remote open 192.168.32.101 64999
#
Chapter 2. Global configuration mode
31
Advertisement
Table of Contents
