Syntax
load-interval measurement-interval
Parameters
measurement-interval
Guidelines
The load-interval command specifies the duration of a measurement interval.
During this interval, system load is estimated and expressed as a percentage. Use
this command in conjunction with the show load command to monitor system
load. The greater the percentage the greater the use of system resources.
Related Commands
show cpu, show load
Examples
v Specifies an measurement interval of 2.5 seconds.
logging category
Enters Log Category configuration mode or delete a custom logging category.
Syntax
logging category name
no logging category name
Parameters
name
Guidelines
Use the no logging category command to delete the custom logging category.
Related Commands
cancel, exit
logging event
Adds an event class (a set of related events) and a priority to an existing log.
Syntax
logging event name category priority
no logging event name category
60
Command Reference
Specifies the measurement interval in milliseconds. Use an integer in the
range of 500 through 5000. The default is 1000.
# load-interval 2500
#
Specifies the name for a custom logging category.