Table of Contents
Advertisement
retry (deprecated)
Comments
Deprecated command. Has no effect.
rotate
Sets the maximum number of file rotations.
Syntax
rotate count
Parameters
count
Guidelines
The rotate command specifies the maximum number of rotations for the log file.
Depending on the Machine Type of the appliance, the location of the file can be the
local file system, the compact flash, or the hard disk array.
Type 7993 (9003)
Type 9235
Assuming a file name of CryptoLog and three rotations, the directory that contains
the log file can consist of up to the following four local files:
CryptoLog
CryptoLog1
CryptoLog2
CryptoLog3
This command is meaningful only when the following conditions are met:
v The log type, as specified by the type command is file.
v The archival mode, as specified by the archive-mode command, is rotate.
Related Commands
archive-mode, type
402
Command Reference
Specifies how many times to rotate a log file. Use an integer in the range
of 1 through 100. The default is 3.
Supports only the local file system.
Supports the local file system and the model-specific, auxiliary data storage
(compact flash or hard disk array).
v The compact flash provides 512 MB of storage.
v The hard disk array provides 70 GB of storage.
The current log file
The log file that was most recently archived.
The log file that was next most recently archived.
The oldest log file
Advertisement
Table of Contents
