Table of Contents
Advertisement
Note: Users should consider security implications before revealing software
Use the no identifier command to suppress the Server response header field.
Examples
v Specifies Release 3.7.1 as the contents of the Server response header field.
v Suppresses the transmission of the Server response header field.
ip-address
Specifies the local IP address to monitor for incoming traffic.
Syntax
ip-address {address | 0}
Parameters
address Specifies the IP address (primary or secondary) of a DataPower Ethernet
0
Guidelines
In conjunction with the port command, identifies the IP addresses and ports that
the HTTP service monitors.
Related Commands
port
Examples
v Specifies 10.10.13.35:23000 as the local IP address-port that the current HTTP
local-directory
Specifies the directory from which the HTTP service serves documents.
Syntax
local-directory {config: | image: | store: | temporary:}
Parameters
config:
330
Command Reference
version information.
# identifier "Release 3.7.1"
#
# no identifier
#
interface.
Indicates all DataPower Ethernet interfaces.
service monitor.
# http telnet-1
Telnet Service configuration mode
# ip-address 10.10.13.35
# port 23000
#
Serves documents from the configuration (config:) directory
Advertisement
Table of Contents
