conformancepolicy
Enters Conformance Policy configuration mode.
Syntax
conformancepolicy name
no conformancepolicy name
Parameters
name
Guidelines
Use the conformancepolicy command to enter Conformance Policy configuration
mode to create or edit a Conformance Policy. A Conformance Policy is used by a
conformance filter or a conformance transform.
v For a conformance filter, define a filter action that uses the store:///
v For a conformance filter, define a transform (xform) action that uses the
A Conformance Policy supports the following profiles:
v Web Services Interoperability (WS-I) Basic Profile, version 1.0. The
v WS-I Basic Profile, version 1.1. The documentation is available at the
v WS-I Attachments Profile, version 1.0. The documentation is available at the
v WS-I Basic Security Profile, version 1.0. The documentation is available at the
Use the no conformancepolicy command to delete a Conformance Policy.
Use the cancel or exit command to exit Conformance Policy configuration mode
and return to Global configuration mode.
Related Commands
cancel, exit
copy
Copies a file to or from the DataPower appliance.
Syntax
copy [-f] source destination
Specifies the name of the Conformance Policy.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
conformance-filter.xsl style sheet and specifies the named Conformance
Policy.
store:///conformance-xform.xsl style sheet and specifies the named
Conformance Policy.
documentation is available at the http://www.ws-i.org/Profiles/BasicProfile-
1.0.html site.
http://www.ws-i.org/Profiles/BasicProfile-1.1.html site
http://www.ws-i.org/Profiles/AttachmentsProfile-1.0.html site.
http://www.ws-i.org/Profiles/BasicSecurityProfile-1.0.html site.
Chapter 2. Global configuration mode
35