Table of Contents
Advertisement
v Enables the search results algorithm for the mgr1 XML Manager, which restores
send error-report
Sends an error report as e-mail.
Syntax
send error-report mail-server subject email-address [email-address ...]
Parameters
mail-server
subject Specifies the text string for the subject field of the outgoing message.
email-address
Guidelines
When using send error-report, keep the following points in mind.
v With automated notification enabled, the appliance searches for a backtrace file
v Place this command within the configuration file to ensure that it will be
v If identifying the SMTP server by host name, you must place this command
v This command can be issued to immediately send an error report that was
Related Commands
failure-notification, save error-report, send file
Examples
v On system restart, transmits a notification to supportteam@customer.com and
send file
Enables SMTP-based file transmission.
Syntax
send file URL mail-server email-address
92
Command Reference
the default condition.
# search results mgr1
Configuration successfully updated
#
Identifies a local SMTP server by IP address or by host name.
Specifies the list of fully-qualified email addresses that identifies one or
more recipients.
(that contains failure related data) at each reboot. On finding a backtrace file, the
appliance sends the file to the appliance does not issue any notifications.
executed upon each reboot.
after the ip name-server command in the configuration file — otherwise the
appliance will be unable to perform host name: IP address resolution.
generated with the save error-report command.
weekendcoverage@attbb.com via the specified mail server.
# send error-report
smtp.customer.com ALERT! supportteam@customer.com weekendceverage@attbb.com
Advertisement
Table of Contents
