port
Specifies the local port monitored by the HTTP service for incoming traffic.
Syntax
port port
Parameters
port
Guidelines
Use the port command to change the port that is assigned with the ip-address
command.
Related Commands
ip-address
Examples
v Specifies 10.10.13.35:23000 as the local IP address-port that the current HTTP
priority
Assigns a service-level priority.
Syntax
priority {low | normal | high}
Parameters
low
normal
high
start-page
Specifies the file to load when a client first accesses the HTTP service.
Syntax
start-page filename
Parameters
filename
332
Command Reference
Specifies the port. The default is 80.
service monitor.
# http telnet-1
Telnet Service configuration mode
# ip-address 10.10.13.35
# port 23000
#
Receives below normal priority for scheduling or for resource allocation.
(Default) Receives normal priority for scheduling or for resource allocation.
Receives above normal priority for scheduling or for resource allocation.
Specifies the name of the file to display.