Horn Inspection; Horn Removal And Installation - Suzuki VLR1800 Service Manual

Horn Inspection

NOTE
If the horn sound condition is normal, it is not
necessary to inspect the horn button
continuity.
Horn Button Inspection
1) Remove the headlight. Refer to "Exterior Parts
Removal and Installation in Section 9D (Page 9D-
3)".
2) Disconnect the left handlebar switch coupler (1).
3) Inspect the horn button for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to "Handlebars Removal and Installation in
Section 6B (Page 6B-2)".
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
Color
B/Bl
Position
PUSH
Horn Inspection
1) Disconnect the horn couplers (1).
1
B822H19306017
1
I822H1930022-01
B/W
I822H1930030-02
I822H1930023-02
Combination Meter / Fuel Meter / Horn:
2) Connect a 12 V battery to terminal "A" and terminal
"B". If the sound is not heard from the horn, replace
the horn with a new one.
"B"
3) Connect the horn coupler.

Horn Removal and Installation

Removal
1) Remove the left frame head cover. Refer to "Exterior
Parts Removal and Installation in Section 9D
(Page 9D-3)".
2) Disconnect the horn couplers (1).
3) Remove the horn (2) by removing the mounting bolt.
Installation
Install the horn in the reverse order of removal.
9C-9
"A"
I822H1930024-02
B822H19306018
1
I822H1930025-02
2
I822H1930027-03