Menu Overview - Extron electronics SMP 351 User Manual

Menu Overview

EXTRON
351 FW V1.00
45
SMP 351
sec.
ITIALIZING
on shown in the default display cycle differs
ctive input and the type of video signal.
ys only during a recording.
ays the remaining time in the event and the
g time available during an unscheduled
After start-up, when no adjustments are actively being made, the Default Display Cycle
(see figure 12) runs on the LCD (
through the input and output format information, showing the number and video format of
the active input and the current output resolution.
NOTE: If a signal is not present on the currently selected input, NO SIGNAL appears in
place of the input type. For example, IN#4 NO SIGNAL.
If there is an active recording, TIME RECORD displays the current length of the recording.
TIME REMAIN shows the time remaining for an active scheduled recording.
In#1 1024x768@60
In#3 720p@60
2 sec.
TIME REMAIN
HH:MM:SS
Figure 12. Default Display Cycle
Press the Menu button once to bring up the first main (top level) menu, as shown below.
Each successive Menu button press cycles to the Next main menu.
NOTE: From any menu or submenu, after 20 seconds of inactivity, the SMP 351
times-out to the default display cycle.
PICTURE
Menu Menu
PRESETS
CONTROL
Next Next Next Next
(to submenus) (to submenus)
Menu
EXIT MENU? Menu
STATUS
PRESS NEXT
Next
(to submenus)
Figure 13. Top Level Menus
The flowchart above provides an overview of the menu system.
The top level menus are displayed one at a time, in order, on the LCD panel by pressing the
Menu front panel button.
To return to the default cycle from a top level menu or submenu, press Menu repeatedly until
Exit Menu? appears, then press Next. Alternatively, the menu times out after 20 seconds
of inactivity and returns to the default cycle.
Press Next when a menu displays to access its submenu. Within the submenu, press
Menu to exit the submenu and return to the currently active menu or press Next to move to
the Next submenu.
Submenu details with configuration and options for each setting are on the following
pages. A complete schematic of the menus and submenus is in the reference section (see
Front Panel Menu Diagrams
on the previous page). The screen progressively cycles
G
Default Display Cycle
2
ARCHIVE 2.0 MB
sec.
1280x720@10 fps
2 sec.
2
sec.
TIME RECORD
HH:MM:SS
RECORD/STREAM
Menu Menu
CONFIGURATION
Next Next
(to submenus)
Menu VIEW COMM
SETTINGS
Next Next
+
(to submenus)
Input 5
for Edit Menu
on page 195).
INPUT
Menu Menu Menu Menu
CONFIGURATION
Next
(to submenus)
Menu ADVANCED Menu
CONFIGURATION
Next
(to submenus)
SMP 351 • Operation
BACKGROUND
RECALL
Next
(to submenus)
22