Extron electronics SMP 351 User Manual page 30

Default encoder presets
The first nine encoder presets are predefined.
Preset 3 is the default value for the Archive Encoder.
Preset 9 is the default value for the Confidence Encoder.
Preset Preset Resolution
# Name
1 1080p High 1920x1080
2 1080p Low 1920x1080
*3 720p High 1280x720
4 720p Low 1280x720
5 480p High
6 480p Low
7 VGA High 1280x1024
8 VGA Low 1024x768
9 Confidence
10 User Defined
11 User Defined
12 User Defined
13 User Defined
14 User Defined
15 User Defined
16 User Defined
NOTES:
• * Audio settings are determined by the encoding for the primary recording or stream. Audio for
confidence monitoring is not re-encoded. Therefore, by default, the recording uses encoder Preset 3,
and the audio bitrate is 192 kbps.
• Default record mode is video and audio.
•
The predefined encoder presets can be modified by the user. If necessary, a factory reset returns all
changes to the above table values.
• Recalling default encoder preset 9 to the archive encoder subsittues the default confidence resolution
512x288 with the minimum available resolution for the archive encoder: 848x480.
User presets
User presets save current settings or recall previously saved
configurations for the selected input. User presets can be saved on
one input rate and recalled on a different input rate. There are 16 user
presets per input.
User presets save the following parameters (per input):
•
•
•
Video Frame
Bitrate Rate
(Kbps) (fps)
8000 30
6000 15
5000 30
3000 15
848x480 2500 30
848x480 1500 15
3500 30
2500 15
512x288 350 15
Color • Preset Name
Tint Aspect Ratio
•
Contrast • Brightness
Audio Bitrate GOP
Bitrate Control Length
(Kbps)
320 VBR 30
128 CVBR 30
192 VBR 30
128 CVBR 30
128 VBR 30
80 CVBR 30
128 VBR 30
128 VBR 30
* VBR 15
SMP 351 • Operation
H.264 H.264
Profile Level
High 4.1
Main 3.1
High 3.1
Main 3.1
High 3.1
Main 3.1
High 4.1
High 3.1
Base 3.0
Menu
PRESETS
Next
ARCHIVE ENCODER
RECALL <N/A>
Rotate either to
select a preset to recall.
ARCHIVE ENCODER
SAVE <N/A>
Rotate either to select
a preset # to save
current settings to.
IN<1> USER RECAL
<N/A>
Rotate to select an
input.
Rotate to select a preset.
IN<1> USER SAVE
<N/A>
Rotate to select an
input.
Rotate to select a preset.
24