Background Recall Menu - Extron electronics SMP 351 User Manual

Rotate
INPUT #[3]
<AUTO DETECT>
ASPECT RATIO IN[1]
Rotate either to
<FILL>
select the input format.
Rotate either to
select an aspect ratio for the
(3) H START
selected input.
<128>
Audio Select
EDID INPUT #[1]
Rotate
<720p_60_2ch>
start pixel.
Each of the five inputs has a corresponding input audio format selection. The selected input
Rotate
Rotate
start pixel.
is displayed in the first line.
EDID value for the
(3) H ACTIVE
active input.
<1024>
IN[1] AUDIO SELECT
Rotate
<LPCM 2CH>
width.
Rotate
Rotate either to
select an audio input source
(3) TTLPIX
for the selected input.
<XXX>
For HDMI inputs 1, 2, and 4, the audio format can be:
IN[1] AUDIO LEVEL
Rotate
<0 dB>
Rotate
• LPCM 2CH - for embedded digital audio (default)
Rotate either to set the
audio input level from -18
ANALOG AUDIO - for analog audio from the rear panel captive screw connections
•
ASPECT RATIO IN[1]
to +24 dB.
<FILL>
• OFF - for no audio
Rotate either to
select an aspect ratio for the
For analog video input 3 and optional SDI input 5, the audio format can be:
selected input.
• ANALOG AUDIO - for analog audio from the rear panel captive screw connections
EDID INPUT #[1]
<720p_60_2ch> (default)
Rotate
OFF - for no audio
•
EDID value for the
active input.
Audio level
IN[1] AUDIO SELECT
<LPCM 2CH>
Each audio input channel can be adjusted from -18 dB to +24 dB. The default value is
Rotate either to
0 dB. The selected input is displayed in the first line.
select an audio input source
for the selected input.
IN[1] AUDIO LEVEL
<0 dB>
Rotate either to set the
audio input level from -18
to +24 dB.

Background Recall Menu

A background can be selected to record with the channel A and B inputs. Background
files must be in PNG format and uploaded to the Background folder of the SMP 351
using the embedded Web pages or an SFTP client (see
page 124).
Use either knob to scroll through available files. Press Next to apply the background to
the current layout. If the file is smaller than the selected output resolution, the background
displays from the top left corner. If the file resolution is larger, the background is cropped to
fit the selected resolution.
to adjust phase.
V
<128>
to select the horizontal
to adjust the vertical
to set an
V
<0768>
to adjust Horizontal Active pixel
to adjust Vertical Active pixel height.
PHASE
<16>
to adjust TTL pixel width.
to adjust phase.
to set an
BACKGROUND
RECALL
RECALL
<default.png>
Rotate either to select.
Press to load
the background file
and exit.
Upload a File to the SMP 351
SMP 351 • Operation
on
37