Picture Control Menu - Extron electronics SMP 351 User Manual

Picture Control Menu

The Picture Control menu includes all picture settings like
Color, Tint, Brightness, and Contrast of the picture.
user to adjust horizontal and vertical window positioning along
with horizontal and vertical window size for the selected input
(see Layout Presets
From the Picture Control menu, press Next to move to
the desired submenu.
In full screen mode, only channel A or only channel B
is displayed. If both channels are active, use the
Channel Select submenu and either adjustment control to
select between channel A and B. The submenu displays the on
or off status of the selected window.
Within the submenu, use the Adjust knobs to select and
change values as required.
Press Menu to exit the submenu.
The Channel Select submenu is available for all inputs.
Subsequent picture control submenus are available depending
on the input selection (see the following table).
Position
Size
Brightness
Contrast
Color
Tint
NOTES:
• * The position range depends on the selected resolution.
•
indicates applicable picture controls for the input type.
X
• The position and size values are for archive endoding.
Channel select
The position submenu selects the input channel for the remainder of the submenus.
Rotate either Adjust knob to switch between Channel A and B
Picture position
This submenu is used to set the horizontal (H) and vertical (V) position of the active video for
the selected channel. The range is dynamically adjusted to ensure the window stays on the
screen. A small window (for example, 300 pixels wide) cannot go far into the negative. The
maximum value depends on the archive encoder resolution.
To use this submenu:
Rotate the left (
•
the selected input. The selected value relates to the left edge of the active video. The
default is 0000.
• Rotate the right (
selected input. The selected value relates to the top edge of the active video. The
default is 0000.
on page 20).
Range YUVp/
HDTV
* X
to
64 4096 X
to
X
0 127
to
0 127 X
to
0 127
to
0 127
[
) Adjust knob to change the horizontal position of the video for
{
) Adjust knob to change the vertical position of the video for the
PICTURE
Menu
CONTROL
It allows the
CHANNEL SELECT
<A> ON
Rotate either to select a
channel.
[A] H POSITION V
+0000 +0000
Rotate
Rotate
[A] H SIZE V
<640> <480>
Rotate
Rotate
[A] BRIGHT CONTRAST
<064> <064>
Rotate
Rotate
[A] COLOR TINT
<064> <064>
Rotate
Rotate
YUVi Composite
Video
X X
X X
X X
X X
X X
NTSC Only
SMP 351 • Operation
Menu
to adjust Horizontal Position.
to adjust Vertical Position.
to adjust Horizontal Size.
to adjust Vertical Size.
to adjust Brightness.
to adjust Contrast.
to select Color.
to select Tint.
HDMI
X
X
X
X
26