Push And Pull Stream Playback Urls - Extron electronics SMP 351 User Manual

Streaming media processor
Hide thumbs Also See for SMP 351:
Table of Contents

Advertisement

Push and Pull Stream Playback URLs

To verify a running stream, use the templates below to place the
stream into the VLC "Open Network Stream" dialog (see step 5 of
Playing a Pull Stream Using VLC Media Player
IP address for <SMP351_IP>. Substitute the destination IP address and port number for
<DESTINATION_IP>:DESTINATION_PORT.
PULL Streaming:
RTSP Unicast
(Archive)
RTSP Unicast
(Confidence)
RTSP Multicast
(Archive)
RTSP Multicast
(Confidence)
Table 1. Pull Stream URLs
PUSH Streaming:
Unicast (Destination IP must be set to the location where the stream is played)
Multicast (Destination IP must be multicast IP address)
Table 2. Push Stream URLs
NOTES:
<SMP351_IP> is the IP address of the SMP 351.
For push URLs, the Destination Port is the lowest port in the "Port Range" set from
the Web UI (see
UDP://@:DESTINATION_PORT default is UDP://@:12340 .
Some dependencies may apply with certain versions of VLC.
For ES/RTP, SAP is available in "Video only" stream mode.
URL
rtsp://<SMP351_IP>/extron1
rtsp://<SMP351_IP>/extron3
rtsp://<SMP351_IP>/extron1
or
HTTP://<SMP351_IP>/live/pull/multicast1.sdp
rtsp://<SMP351_IP>/extron3
or
HTTP://<SMP351_IP>/multicast3.sdp
TS/UDP
UDP://@:DESTINATION_PORT
TS/RTP
RTP://@:DESTINATION_PORT
ES/RTP
HTTP://<SMP351_IP>/live/push/unicast1.sdp
(Archive)
ES/RTP
HTTP://<SMP351_IP>/live/push/unicast3.sdp
(Conf)
TS/UDP
UDP://@<DESTINATION_IP>:DESTINATION_PORT
TS/RTP
RTP://@<DESTINATION_IP>:DESTINATION_PORT
ES/RTP
HTTP://<SMP351_IP>/live/push/multicast1.sdp
(Archive)
ES/RTP
HTTP://<SMP351_IP>/live/push/multicast3.sdp
(Conf)
Configure Streaming
on page 91).
SMP 351 • Reference Information
on page 189). Substitute the SMP 351
186

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents