Extron electronics SMP 351 User Manual page 184

Sending commands using a TCP/IP connection
1. Configure the network settings of a control PC so that it can be connected to the
same network as the SMP 351. Use an RJ-45 cable to connect the control PC to the
network.
2. Open DataViewer.
3.
On the Communication Setup window (see figure 73):
a. Select the TCP/IP tab.
b. Enter the IP address of the SMP 351
into the Hostname/IP Address
field.
c. In the Telnet Port field, enter the
port number for the connection.
NOTE: The default port to send SIS
commands to the SMP 351 is port 23.
4. Click OK. The Communication Setup
window closes.
5. The main DataViewer window opens and the SMP 351 responds with a copyright
statement containing the model number, part number, and current firmware version of
the connected SMP 351, along with the date.
6. Use the Commands field to enter SIS commands and view the responses in the
Responses field.
For example, enter 1I, the command to display the model name, in the Commands:
field on the left side. The Responses: field on the right returns the model number of
the connected device.
Enter SIS
Commands
1I
SMP 351
Figure 74. Enter Commands and View Responses
Figure 73.
View
Responses
SMP 351 • Reference Information
TCP/IP Communication
Setup Window
178