Extron electronics SMP 351 User Manual page 114

For all three options, access the Date and Time panel in the System Settings page by
clicking the Expand button for the pane to expand it. The pane opens.
To sync the unit with the connected computer:
1. Click Sync Date and Time to PC. This sets the date, time, and time zone for the
SMP 351 automatically based on the date and time of the connected computer. The
date and time settings are automatically updated.
2. Click Save.
To manually set the date, time, and time zone:
1.
Click the calendar icon (
specific date or click Today to select the current date.
2. Click anywhere outside the calendar to exit the calendar. The new date is in the text
adjacent to the calendar button.
3. In the Time: fields, type in numbers for the hour, minutes, and seconds or use the Up
and Down arrows to change the values. Select AM or PM from the drop-down list.
4. Select the appropriate zone from the Time Zone drop-down list.
5. Click Save.
NOTE: It is recommended to reboot the device after manually adjusting the system
time (see System Resets
To sync the unit with an NTP server:
1.
Select (check) the NTP Time Sync check box.
2. Type the URLs of the NTP servers used for time reference into one or more of the
NTP Server fields. A resource for NTP servers is http://pool.ntp.org/, which lists pools
of NTP servers, grouped by region, to which you can link computers or devices to
synchronize time.
NOTE: A valid DNS server must be configured in order to resolve an NTP server by
its domain name. Alternatively, an IP address can be used.
3. Click Sync Now!. The unit checks one or more of the specified servers or server pools
and updates the date and time settings.
4. Click Save.
) beside the date line to open a pop-up calendar. Select a
on page 139).
SMP 351 • Web-Based User Interface 108