Extron electronics SMP 351 User Manual page 90

To create and save a user preset:
1. Select the applicable input (see
2.
Adjust the picture controls as desired (see
3. Select a preset number from the preset number list in the User Presets panel.
4. In the Preset Name field, enter a name for the preset.
5. Click Save Preset. If an input preset already exists in this location, a confirmation
dialog box opens. In the dialog box, click Overwrite to overwrite the previous preset.
The settings save to the selected preset location for recall at a later time.
Recall and clear an existing user preset
User presets can be recalled only on the input that was active when the preset was saved.
For example, a user preset saved when input 2 was active can be recalled only for input 2.
To recall a user preset:
1. Select the applicable input (see
2. Select a preset number from the preset number list in the User Presets panel.
3. Click Recall Preset. A confirmation dialog box opens.
4. In the dialog box, click Recall.
NOTES:
• A preset can also be recalled by right-clicking on it and selecting Recall.
• Recalling a preset overwrites the current input settings.
To clear a user preset:
1. Select the applicable preset and click Clear. A confirmation dialog box opens.
2.
In the dialog box, click Clear. The preset name is removed and the preset is cleared.
NOTE: A preset can also be cleared by right clicking on it and selecting Clear.
To rename a user preset:
1. Double-click the applicable preset.
2. In the Preset Name field, enter the new name.
3.
Either click Save, then click Overwrite to overwrite the preset, or click on another
part of the screen. The preset is saved with the new name.
Image Configuration on page 77).
Adjusting picture controls
Image Configuration on page 77).
SMP 351 • Web-Based User Interface
on page 78).
84