Status; Logs - Extron electronics SMP 351 User Manual

Status

The Status page within the Troubleshooting tab displays factory-defined and
user-defined information about the unit. This page contains the unit name, part number,
firmware version, MAC address, location description, and related information about the unit.
It also displays the current audio bitrate and the video bitrates for all encoding streams.
Some of the information in this page can also be found using SIS commands (see
Command and Response Tables
page 42).
To open this page, click the Troubleshooting tab at the top of the SMP 351 embedded
Web pages and then click the Status tab on the second tier of tabs.
The Status page opens, showing the Detailed System Status and Encoder
Status panels.
Figure 64.
All of the items on this page are read-only except the Download Firmware link, a
hyperlink to the Extron Website, where you can search for updated firmware for the unit,
and the Sync button which commands the unit to sync its internal clock time and date with
the settings from an NTP server.

Logs

The Logs page within Troubleshooting displays a list (log) of alerts and notices for
any event set up for any status other than Disabled in Configuration>Alarms and
Traps>Alarm Message panels. All log entries are read-only. The logs can be sorted,
on page 155) or the front panel (see
Troubleshooting, Status Page
Status Menu
SMP 351 • Web-Based User Interface
on
131