Front Panel Operation; Front Panel Features - Extron electronics SMP 351 User Manual

Front Panel Operation

This section of the manual discusses the operation of the SMP 351 from the front panel.
Topics covered include:
•
•
•
•
•

Front Panel Features

CHANNEL A
1 2
CHANNEL B
3 4 5
USB STORAGE
CONFIG
A
B
C
Front Panel Features
Layout Presets
SMP 351 Power Up Procedure
Front Panel Menu Operation
Front Panel Lockout (Executive Modes)
AUDIO
L R LAYO UT
PR ES ET
M AR K SWA P SWAP
Figure 8. SMP 351 Front Panel
USB storage port and activity LED – Connect a USB compatible media device to
this port. The green LED blinks during both reading and writing of data. The storage
device can be any standard external hard drive or USB flash drive formatted with a
compatible file system.
NOTE: The SMP 351 can detect and record to USB storage devices using FAT32,
VFAT long file name extensions, EXT2, EXT3, or EXT4 file systems.
Config port — Connect a control device to this port with a USB mini-B cable (not
supplied). Use this port to send SIS commands to the SMP 351 for device configuration
and control (see Remote Communication and Control
Input selection — Press these five buttons to select inputs associated with the rear
panel input connections.
Channel A – Press the corresponding button to select HDMI input 1 or 2. If analog
•
audio (instead of embedded audio) is selected for an input, Ch A analog audio is
output with the video.
Channel B – Press the corresponding button to select composite/component
•
input 3, HDMI input 4, and (optional) SDI input 5. If analog audio is selected for
input 4, Ch B analog audio is output with the selected video input.
The currently selected Channel A input button and currently selected Channel B input
button light solid amber.
NOTE: Input 5 lights only when the optional SDI input card is installed and the input
is selected.
ADJUST
MENU
I/O PRESENTATION CAPTURE RECORDER
1
2
3
NEX T NE XT
4
on page 147).
SMP 351 • Operation
SMP 351
18