Extron electronics SMP 351 User Manual page 82

5. Select an information category from the Information 1 drop-down list.
Figure 45. Universal OSD Information Selection
As an example, if File destination is selected, the OSD text might be Front USB
or Internal Drive Only, depending on the current system settings.
The categories are identical to those used in the SIS information commands (such as
1i, 2i, 3i, and so forth). For reference, see the
page 155.
6. If desired, select an information category from the Information 2 drop-down list and
select another category from the Information 3 drop-down list.
Changes are saved automatically and applied shortly after being selected. The Universal
OSD text appears on-screen in this format:
Display Text, Information 1, Information 2, Information 3. Below are examples of how the
configuration settings (on the left) translate to the universal OSD (on the right).
Command and Response Tables
REC1, 56%
00:10:33,20:10:51
OSD, SMP 351,1*4,up*100*full
SMP 351 • Web-Based User Interface
on
76