Input/Output Configuration - Extron electronics SMP 351 User Manual

Input/Output Configuration

The controls within the Input/Output Settings page within the Configuration tab
provides a way to select a number of settings for video input and test the output and select
options for audio output mode, mute, and levels.
A user must be logged in as an administrator to see or change these settings. This page is
divided into three panes:
Input/Output Configuration – Change the name for each input, select the video format for
input 3, select an aspect ratio type, enable and disable Auto-Image, Auto Memory, HDCP
authorization, and audio gain for each HDMI input
Preview Output Configuration – Provides a way to set the refresh rate for the local HDMI
output
OSD Configuration – Select and display one of several video test patterns for use during
setup, set up the content of the universal on-screen display (OSD), and set a display period
for the input switching OSD.
To open this page, click the Configuration tab at the top of the SMP 351 embedded
Web pages and click the Input/Output Settings tab on the second tier of tabs.
Figure 43.
The Input/Output Settings page opens.
Figure 44.
Input/Output Settings Tab
Input/Output Configuration Page
SMP 351 • Web-Based User Interface 71