Extron electronics SMP 351 User Manual page 75

6. In the Capture Agent Name field, enter the SMP 351 unit name to appear on the
Matterhorn server list of capture agents. By default, this is the same as the name of
the SMP 351 as set up in the System Name field within the Unit Identification
panel (see Setting the system (unit) name and location
the name of the SMP here changes the name in the System Settings page.
Capture Agent Name:
User Name:
Password:
Matterhorn Core Address:
NOTES:
• The Capture Agent Name must match the SMP 351 Unit Location name
(see Setting the system (unit) name and location
SMP 351 to register with the Matterhorn server.
• To simplify setup, the SMP 351 unit name updates when a new capture
agent name is assigned. However, changing the SMP 351 name does not
automatically update the capture agent name.
7.
Enter the user name of the Matterhorn server account, as noted in step 2, into the
User Name field.
8. Enter the password required by the Matterhorn system account into the Password
field.
9. Enter the IP address or fully qualified domain name of the server that hosts the
Matterhorn system into the Matterhorn Core Address field.
NOTE: If using a fully qualified domain name, ensure that a valid DNS server
address is configured in the Networking panel of the System Settings page.
10. If desired, in the Track Flavor field, change or modify the Matterhorn "flavor" to use
to categorize the recordings.
"Flavors" are labels that the Matterhorn system uses to route and process the workflow
of ingested files. According to the Opencast Matterhorn wiki, "flavors help with the
integration of capture client, processing pipeline and player." You can associate or
configure specific workflow operations with certain flavors of files. The Matterhorn
release documentation says, "...You will typically use */source flavors at this point,
indicating that this is raw material that was not processed by Matterhorn yet. The
typical flavors are presenter/source for a regular video and presentation/source
for the vga recording." ..."you can create your own flavors like audience/source or
documentcamera/source. The presentation and presenter flavors are supported by the
default Matterhorn workflows[;] for any other flavor you will need to create your own
workflows."
11. The default Uniform Resource Locator (URL) values in the rest of the fields on this page
can be left unchanged unless your Matterhorn server installation uses customized
settings. Contact your system administrator for details on whether customization is
necessary. If changes are needed, type in the customized URL into the appropriate URL
field.
My_SMP351
Matterhorn User 1
Matterhorn_Password
http://11.11.11.1111:8080
SMP 351 • Web-Based User Interface
on page 107). Changing
on page 107) for the
69