Extron electronics SMP 351 User Manual page 36

Streaming
Streaming is available in both Archive and Confidence encodes. Streaming can be ON
(enabled) or OFF. When streaming is enabled, the STREAM METHOD, STREAM PROTOCOL,
and MULTICAST or DESTINATION IP submenus are available. The appropriate submenus
are displayed depending on the previous submenu selection.
In the menus and submenus MULTI refers to a multicast protocol and UNI refers to unicast.
RECORD/STREAM
Menu
CONFIGURATION
STREAMING
<ON>
Rotate either to
toggle streaming
on or off.
STREAM METHOD
<PULL>
Rotate either to
select push or pull.
STREAM PROTOCOL STREAM PROTOCOL
-OR-
<UNI RTP/UDP> <MULTI RTP/UDP>
Rotate either to select protocol.
Press to select and move
to next submenu.
XXX.XXX.XXX.XXX
Figure 15. Streaming Submenus
The following submenus appear only when the streaming selection is Archive. Confidence
encodes have independent stream settings.
Stream Method
Rotate either Adjust knob to select a stream method: PULL (default) or PUSH.
Stream Protocol
The available stream protocol follows Push or Pull streaming.
When PULL streaming is selected, the user can choose between UNI RTP/UDP (default)
and MULTI RTP/UDP.
When PUSH streaming is selected, the user can pick one of six selections: UNI TS/UDP
(default), UNI TS/RTP, UNI ES/RTP, MULTI TS/UDP, MULTI TS/RTP and MULTI ES/
RTP.
- OR -
MULTICAST IP
Rotate to select octet.
Rotate to change address.
STREAM METHOD
<PUSH>
STREAM PROTOCOL
Rotate either to select protocol from
<UNI RTP/UDP>
this list:
UNI TS/UDP MULTI TS/UDP
UNI TS/RTP MULTI TS/RTP
UNI ES/RTP MULTI ES/RTP
Press to select and move
DESTINATION IP
to next submenu.
XXX.XXX.XXX.XXX
Rotate to select octet.
Rotate to change address.
SMP 351 • Operation 30