Set The Startup State For The Application - Extron electronics SMP 351 User Manual

Set the Startup State for the Application

If desired, specify whether to run the application when the SMP starts up or upon reboot.
You must do this within the SMP 351 embedded Web pages, in the Configuration >
Advanced Features > Apps panel, not within the application.
To do so:
1.
2.
Click in the Startup State column of the Apps panel to access the drop-down list.
Select either Enabled (default, run the app upon unit startup) or Disabled (do not
run the app upon startup).
SMP 351 • Applications 146