Extron electronics SMP 351 User Manual page 74

Scheduling with an opencast Matterhorn server
To use an Opencast Matterhorn server to import event schedules automatically on an
ongoing basis:
1. Install and set up the Matterhorn server system.
2. Write down the user name, server account password, and IP or DNS address of the
Matterhorn system.
TIP: The system digest credentials and public URL of the Matterhorn installation
can be found in the config.properties file typically located in the etc folder
of the Matterhorn server installation directory.
3. From the Schedule Settings page, select the Centralized scheduling via
Opencast Matterhorn server radio button or click the Opencast Scheduling
tab. The Active Schedule Source dialog box opens.
4.
Click OK to proceed.
5. Click the Opencast Scheduling tab.
MySMP351
Matterhorn User1
Matterhorn_Password
http://11.11.11.11.1111:8080
Figure 42. Opencast Scheduling Tab
SMP 351 • Web-Based User Interface 68