Extron electronics SMP 351 User Manual page 31

To save a user preset from the front panel:
1. From the Picture Control menu, configure the selected input as desired (see
Input Configuration Menu
2. Press Menu to cycle through the main menus to the Presets menu.
3. Press Next to cycle to the User Save submenu.
[
4.
Rotate the left ( ) Adjust knob to select the input.
NOTE: Only the selected front panel channel A and the selected channel B inputs
are available.
{
5.
Use the right ( ) Adjust knob to select one of the 16 user presets.
6. Press Next to save the new preset values.
Each input has sixteen user preset locations available. A configuration can be saved to any
preset number using this menu, the Web-UI, or via SIS. Select N/A and press Next to exit
without saving settings.
To recall a user preset from the front panel:
1. Press Menu to cycle through the main menus to the Presets menu.
2. Press Next to cycle to the User Recall submenu.
[
3. Rotate the left ( ) Adjust knob to select the input.
NOTE: Only the selected front panel channel A and the selected channel B inputs
are available.
{
4. Use the left ( ) Adjust knob to select one of the sixteen user presets.
5. Press Next to select the new preset for the input.
Each input has 16 user presets recalled using this menu, the Web-UI, or via SIS. Select N/A
and press Next to exit without applying the user preset settings.
on page 33).
SMP 351 • Operation 25