Except for the overscan settings and input preset saving and recalling, all settings on this
page can also be configured using the front panel menu and controls.
You must select an input from the Input Config panel in the upper left of this page before
you can adjust the image settings or save or recall presets. Note that selecting an input
within the Image Settings page also changes the active input.
Adjusting picture controls
The
panel has image settings that are adjusted and then applied to the
Picture Controls
currently selected input. These include:
•
Brightness
Contrast
•
Figure 47.
Configuration Settings, Picture Controls
To adjust picture controls for the currently selected input:
Click and drag the associated handle of the slider for any image setting (Brightness,
•
Contrast, Color, or Tint) to the desired value.
•
Alternatively, to change the value in the field, enter a value within the field associated
with the image setting, or click the Up and Down arrows alongside the associated field.
Observe the picture on the display and adjust settings as necessary.
•
Color
Tint
•
SMP 351 • Web-Based User Interface
78