Logging Out And Logging In - Extron electronics SMP 351 User Manual

Logging Out and Logging In

To change roles (from administrator to user, or user to administrator) or user accounts, log
out of the embedded Web pages. The user or administrator status is displayed in the upper
right corner of all Web pages:
The Logout button appears only if one or more passwords is active.
To log out of the Web pages:
1.
2.
To log in to an SMP 351 :
1.
2.
From any embedded Web page, click the Logout button at the upper right of the
browser page.
A Logout dialog box opens.
Click OK to log out of the SMP 351 Web pages, or click Cancel to remain logged on
using the same account.
The Logout dialog closes and returns you to the embedded Web pages screen.
NOTE: If you click Cancel, you remain logged in and the embedded Web pages
continue to function as they did before you clicked Logout.
If you click OK, the controls are replaced by a message confirming that you are
logged out and asking you to close the browser. Close the browser completely. If
you close only a tab within the browser, the logout process does not complete.
Open a Web browser.
Enter the IP address of the SMP 351 into the address field and navigate to that unit.
The Authentication Required (Chrome or Firefox), or Windows Security
(Internet Explorer) Login dialog box opens.
Authentication Required
The server http://10.13.194.28:80 requires a username and
password. The server says 'SMP_351'.
User Name:
Password:
Figure 25. Chrome Authentication Dialog
SMP 351 • Web-Based User Interface 52