Extron electronics SMP 351 User Manual page 134

For additional information on the network path format, options, and allowed characters,
click the ? button in the upper right corner of the Network - Shares dialog, as shown
below.
User Name: and Password: — Entries in these fields are optional and used only if a
•
network share requires password log-in information. Use either these two fields OR the
Options: field, not both.
• Options: — Entries in this field are optional and are used only if a network share
requires password log-in information. The format is user=
. Include a space between the user name and password entries. Use either
password
this field OR the User Name: and Password: fields, but not both. They serve the
same function.
Local Name: — This field can be left blank or you may type in any descriptive name
•
(without spaces or special characters), which will appear in the list in the Files tab.
4.
Click Save to save the information and add the network share to the files list. The
Network - Shares dialog closes and the link to the new network share is listed in the
Shares folder.
NOTE: The Shares folder is is created automatically if it was not present before
you added a network share.
To view the network path of the share after it has been added, right-click the name of the
share and select Shares Info from the pop-up dialog box.
To remove a network share, right-click on the name of the share and select Unmount
share from the pop-up dialog.
username
SMP 351 • Web-Based User Interface
, pass=
128