4.
Select the virtual port number for the stream by typing a number into the port# field or
use the Up and Down arrows to change the value. The default port number is 6000.
5.
Set the MTU (maximum transmission unit length), the maximum network packet size (in
bytes) that the protocol and network layer can pass onwards. Enter a number into the
MTU: field or use the Up and Down arrows to change the value.
The default is 1500 bytes.
6.
Set the port numbers as needed in the following fields:
RTSP
•
RTSP over HTTP
•
RTP
•
Enter a number in each field or use the Up and Down arrows to change the values. See
the streaming reference section
for more information.
(Streaming Method
Overview) starting on page 183
SMP 351 • Web-Based User Interface
93