System Commands - Extron electronics SMP 351 User Manual

Command and Response Tables (continued)
SIS Command
Command
Function
(Host to Device)
Set unit name E X1@
E
Set unit name to
default
View unit name E
E
View telnet
connections
E X2@
Set verbose mode
E
View verbose
mode

System Commands

Backup/Restore
E
Save configuration
E
Restore
configuration
Resets
E
Reboot system
Restart the E
network
E
Reset flash
E
System Reset
(factory defaults)
E
Reset all device
settings and delete
recording files
NOTE: This reset excludes IP settings such as IP address, subnet mask, gateway IP address, unit name, DHCP setting and port
mapping (telnet/Web/direct access) in order to preserve communication with the device.
Absolute reset E
Front panel lock (executive mode)
Set Executive X5)
mode
View Executive
X
mode
X1)
NOTES: = Configuration type
X1@ = Unit name
X2@
= Verbose/Response mode
X5)
= Executive mode
X10) = Default name
Response
(Device to Host)
} X1@ ]
CN
} X10) ]
• CN
} X1@ ]
CN
}
CC n
}
CV Vrb
} X2@]
CV
X1) }
1* XF Cfg1
X1) }
0* XF Cfg0*
}
1BOOT Boot1
}
2BOOT Boot2
}
ZFFF Zpf
}
ZXXX Zpx
}
ZY Zpy
}
ZQQQ Zpq
X Exe
X5)]
0 = IP config (ip.cfg)
2 = Box specific parameters (box.cfg)
Unit name is a text string of up to 63 characters drawn from the alphabet (A-Z), digits (0-9),
and the minus sign/hyphen (-). The first character must be an alpha character. The last
character must not be a minus.
0=clear/none (default for telnet connections)
1=verbose mode (default for USB and RS-232 host control)
2=tagged responses for queries
3=verbose mode and tagged responses for queries
NOTE: If tagged responses is enabled, all read commands return
the data, the same as setting the value does
(Example: command: E CV} Response: Vrb3 ])
0=Off
1=complete lockout (no front panel control)
2=menu lockout
3=recording controls
Combination of model name and last three pairs of MAC address
(Example: SMP-351-07-8C-EC)
]
X2@]
* X1) ]
X1) ]
]
]
]
]
]
]
X5)]
SMP 351 • Remote Communication and Control
Additonal Description
n=number of active IP
connections.
Save configuration to file
location (<directory>/nortxe-
backup).
Load configuration from file
location (<directory>/nortxe-
backup).
Complete system reboot.
Reset flash memory
(excludes recording files).
Resets device to default and
deletes recorded files.
Reset to default except IP
address, delete all user and
recorded files
Same as System Reset, plus
returns the IP address and
subnet mask to defaults.
156