Front Panel Configuration Port - Extron electronics SMP 351 User Manual

Front Panel Configuration Port

The mini type B USB port is located on the front panel (see
page 18). It connects to a host computer for configuration using SIS commands with
DataViewer, available at www.extron.com.
To connect the SMP 351 to a host computer:
NOTE: If an Extron USB device has never been connected to the host computer,
prior to connecting the SMP 351 config (USB) port for the first time, you must install
and activate the USB driver. The simplest way to do this is to install Dataviewer (see
Dataviewer
1. After the USB driver is loaded, connect a USB A to mini B cable between the Config
port on the SMP 351 front panel and a USB port of the PC.
2. If this is the first time an Extron product is connected to the PC, the Found New
Hardware Wizard dialog opens. The first screen offers to connect to Windows Update
to search the Web for the appropriate driver. This is not necessary if the USB driver is
already on your PC (see the note above).
Found New Hardware Wizard
Figure 69.
Select No, not this time if the driver is already on the PC.
3. Click Next.
The following dialog opens:
Found New Hardware Wizard
Figure 70.
4. Select Install the software automatically (Recommended).
NOTE: You do not need to insert an installation disc.
on page 177).
Welcome to the Found New
Hardware Wizard
Windows will search for current and updated software by
looking on your computer, on the hardware installation CD, or on
the Windows Update Web site [with your permission].
Read our privacy policy
Can Windows connect to Windows Update to search for
software?
Yes, this time only
Yes, now and every time I connect a device
2 2
No, not this time
Click Next to continue
3 3
Next >
Found New Hardware Wizard
Welcome to the Found New
Hardware Wizard
This Wizard helps you install software for:
Extron USB Device
If your hardware came with an installation CD
or oppy disk, insert it now.
What do you want the wizard to do?
4 4
Install the software automatically [Recommended]
Install from a list or speci c location [Advanced]
Click Next to continue
5 5
Next >
Install the Software Automatically
SMP 351 • Remote Communication and Control
Front Panel Features
Cancel
Cancel
on
148