Extron electronics SMP 351 User Manual page 164

ASCII Command
Command
(host to unit)
SNMP (Simple Network Management Protocol)
SNMP unit contact
Set unit contact E
Set unit contact to E
default
View unit contact E
SNMP unit location
Set unit location E
Set unit location to E
default
E
View unit location
SNMP community strings
E
Set public
community string
E
Set public
community string
to default
E
View public
community string
Set private E
community string
E
Set private
community string
to default
E
View private
community string
NOTE: Community strings are referred to as passwords in the Web-based user interface.
SNMP access enable
Enable SNMP E
access
Disable SNMP E
access
View SNMP state E
NOTES:
= =
0 Off or disable (default)
X62)
=
1 On or enable
=
SNMP contact name text, up to 64 alphanumeric characters, hyphens, underscores and period.
X62!
default="
Not Specified
=
SNMP location, up to 64 alphanumeric characters, hyphens, underscores and period.
X62@
default="
Not Specified
=
X62# SNMP public community string, up to 64 alphanumeric characters, hyphens, underscores and period.
(default="
public
=
SNMP private community string, up to 64 alphanumeric characters, hyphens, underscores and period.
X62$
(default="
private
Response
(unit to host)
X62! }
C SNMP SnmpC
}
•
C SNMP SnmpC*Not•Specified
} X62!]
CSNMP
X62@ }
L SNMP Snmp L
}
•
L SNMP
SnmpL
} X62@]
LSNMP
X62# }
P SNMP SnmpP
}
P•SNMP SnmpP
} X62#]
PSNMP
X62$ }
X SNMP SnmpX
}
X•SNMP SnmpX
} X62$]
XSNMP
}
E1SNMP SnmpE
}
E0SNMP SnmpE
} X62) ]
ESNMP
")
")
")
")
* X62!]
]
* X62@]
]
*
Not•Specified
* X62#]
]
*
public
* X62$]
]
*
private
*1 ]
*0 ]
SMP 351 • Remote Communication and Control
Additional
Description
Sets the unit contact
X62!
to .
Sets the unit contact to the
default setting.
View the unit contact.
Sets the unit location
X62@
to .
Sets the unit location to the
default setting.
View the unit location.
Sets public community
X62#
string to .
Sets community string to
the default.
View the public community
string.
Sets private community
X62$
string to .
Sets private community
string to the default setting.
View the private community
string.
Enable SNMP access.
Disable SNMP access.
View the SNMP access
setting.
158