Extron electronics SMP 351 User Manual page 95

4. For recording (in the Archive Encoder column) select Audio + Video or Video
Only from the Recording Enabled drop-down list and select an option from the
Default Preset drop-down list.
5. Configure video encoding (see
6.
Configure audio encoding (see
7. In the Encoder Presets section, select (click on) an unassigned preset in the list.
8. Click Save Preset and select Archive from the pop-up list to save the
corresponding parameters. The Preset Name field becomes editable and changes
from "[unassigned]" to "ENCODER PRESET nn," the default name for that preset
number.
Figure 55. Encoder Presets, Save Preset
9. Use the default preset name or enter a new name.
10. Click anywhere else in the Web page to save the preset name.
Configure Video Encoding
To configure video encoding settings for a preset:
1. Enable streaming (for both encoding types) and recording (for archive encoding) as
desired by checking the Streaming Enabled or Recording Enabled check boxes.
2. In the
Video Encoding
drop-down list.
Configure Video Encoding
Configure Video Encoding
panel, select a video resolution from the Resolution
SMP 351 • Web-Based User Interface
on page 89).
on page 89).
89