Record And Stream Configuration Menu - Extron electronics SMP 351 User Manual

Record and Stream Configuration Menu

This menu allows the user to configure
the archive (recording) and confidence
encodes.
Use either Adjust knob to change the
selections.
and move to the Next submenu. Press
Menu to enter changes and return to the
main menu.
The flow chart on the right shows all
possible submenus for the RECORD/
STREAM CONFIGURATION menu.
Subsequent submenus are hidden or
displayed depending on previous submenu
selections (see image at right).
Encoder select menu
This submenu determines the purpose
of the encoded stream. The subsequent
encoder configuration submenus are
dependent this setting. Select one of the
following.
• Archive – Provides the highest quality
stream but uses the most bandwidth
and resources. The settings also apply
to the recordings.
Confidence – Provides a lower
•
quality stream, typically for confidence
monitoring.
Recording and streaming mode
The encoder mode submenu is the second
submenu in the Record/Stream Configuration menu, but the displayed name is
based on the encoder purpose selected in the Encoder submenu.
Recording (for archive only) – On or off.
•
• Streaming – On or off.
• Off – Streaming and recording (when available) can be shut off separately.
For Archive, the default selection is Recording On, Streaming On.
For Confidence, the Streaming selection is On (default) or Off.
Subsequent submenus are available based on the encoder select and encoder mode
selections.
Press Next to enter changes
RECORD/STREAM
CONFIGURATION
ENCODER
-OR-
<ARCHIVE>
Rotate either to
select encoder type.
RECORDING
<ON>
Rotate either to
select mode.
RECORD TO 71.75 GB
<INTERNAL>
Rotate to select internal or external location.
Rotate to select a volume on the external location.
STREAMING
<ON>
Rotate either to
select mode.
STREAM METHOD
<PULL>
Rotate either to select
push or pull streaming.
STREAM PROTOCOL
<MULTI RTP/UDP>
Rotate either to select
protocol to follow stream
method.
MULTICAST IP
XXX.XXX.XXX.XXX
Rotate to select octet.
Rotate to change address.
OUTPUT MODE
<AUDIO/VIDEO>
Rotate either to select audio
and video, or video only.
AUDIO OUTPUT
<CH B ONLY>
Rotate either to
select ChA, ChB or A+B.
RESOLUTION
<1280x720>
Rotate either to
select recording resolution.
FRAME RATE
<30>
Rotate either to
select frame rate.
VID BITRATE AUD
<5000> <384>
Rotate to change video bitrate.
Rotate to change audio bitrate.
SMP 351 • Operation
ENCODER
<CONFIDENCE>
Rotate either to
select encoder type.
STREAMING
<ON>
Rotate either to
select mode.
STREAM METHOD
<PULL>
Rotate either to
select push or pull
streaming.
STREAM PROTOCOL
<UNI RTP/UDP>
Rotate either to
select protocol to follow
stream method.
DESTINATION IP
XXX.XXX.XXX.XXX
Rotate to select octet.
Rotate to change address.
RESOLUTION
<512x288>
Rotate either to
select streaming
resolution.
FRAME RATE
<15>
Rotate either to
select streaming
frame rate.
VID BITRATE AUD
<350> <192>
Rotate to change video bitrate.
Rotate to change audio bitrate.
28