Print Temperature Control - Canon imageRUNNER ADVANCE C5045 Series Service Manual

2
Related Service Mode
(Lv.2) COPIER > OPTION > FNC-SW > FLYING
(To enable/disable Flying start (pre-mature start)
<Setting value>
0: Enable Flying start [default]
1: Disable Flying start
2

Print temperature control

Fixing
temperature
STBY INTR
Startup
(warm-up
rotation)
control
temperature
Command for Command for
Flying start print start
Startup (warm-up rotation) temperature control
•
To increase fixing temperature to be ready for printing once the print-start command is
received.
•
Print temperature control
To set optimal target temperature to prevent fixing failure or offset, and keep the
specified target temperature during printing
A. Setting target temperature → see the table on the next page
Target temperature is specified depending on the paper type, environment
(temperature), fixing speed, elapsed time since the last control of fixing temperature
and fixing temperature at the start of warm-up control.
B. Temperature control during printing
Temperature is controlled according to the detection result of main thermistors 1 and 2.
2-79
PRNT
During print Sheet-to
control -sheet
temperature control
temperature
Time
F-2-124 F-2-124
2-79