SettingtheTonerContainer/TurningtheMainPowerON
MEMO:
OnlyforAUS,theTonerContainerisinstalledonthehostmachine.
1)Connectthepowerplugofthehostmachinetothepoweroutlet.
2)Removetheprotectionsheetonthecontrolpanel.
3)OpentheswitchcoverandturnONthemainpowerswitch.
MEMO:
•
WhenturningONthemainpower,druminitializationanddevelopingassemblyinitializationareautomaticallyexecuted.
•
In case of the host machine with the Toner Container, toner refill is executed in a row.
•
Even turning OFF the main power during drum initialization, developing assembly initialization and toner refill, they will be re-executed when turning ON the power again.
4)Afteractivation,followtheinstructionintheControlPanel,andpresstheshutdownkeyintheControlPanel.
5)TurnONthemainpowerswitch.
6)EnterthefollowingServiceMode,makesurethatthesettingvalueis"1".
•
COPIER>OPTION>FNC-SW>W/SCNR
7)SetthevalueofthefollowingServiceMode.
COPIER > OPTION > BODY > SCANTYPE
•
SettingValue"0"ColorImageReaderUnit-B1/B2
•
SettingValue"1"DuplexColorImageReaderUnit-B1
8)ExittheServiceMode.
MEMO:
•
In case of the host machine with the Toner Container, once the machine goes to standby state, drum initialization, developing assembly initialization and toner refill are completed.
•
IncaseofthehostmachinewithouttheTonerContainer,executethefollowingprocedures.
9
9
9-21
9-21