MarginAdjustment(2ndside)
1)Make2-sidedcopyfromcassette1,andcheck
thattheleftmarginis2.5-/+2.0mm.
Feeding direction
of paper
image
F-9-51
F-9-51
MarginAdjustmentwithMultiPurposeTray(1stside;mechanicaladjustment)
1)PlacepaperontheMultiPurposeTray.See
thelabelonmanualfeedareatoplacepaper.
2)MakecopyfromtheMultiPurposeTray,and
checkthattheleftmarginis2.5-/+1.5mm.
Feeding direction
of paper
image
F-9-52
F-9-52
9
2) If the left margin is out of the specification, change the adjustment value for the left margin on the 2nd side in cassettte 1.
COPIER>ADJUST>FEED-ADJ>ADJ-C1RE;1incrementofthevaluereducestheleftmarginby0.1mm
3)Asfortheadjustmentvalueforsideregistrationonthe2ndsideincassette2,enterthesamevalueastheadjustmentvaluefortheleftmarginonthe
2ndsideincassette1.
COPIER>ADJUST>FEED-ADJ>ADJ-C2RE
4)Tomakethesettingvalueeffective,turnOFF/ONthemainpoweroftheHostMachine.
5)Make2-sidedcopyfromcassette2,andcheckthattheleftmarginis2.5-/+2.0mm.
6) If the margin is out of the specification, change the adjustment value for the left margin on the 2nd side in cassette 2.
COPIER>ADJUST>FEED-ADJ>ADJ-C2RE;1incrementofthevaluereducestheleftmarginby0.1mm.
7)Writedownthenewadjustmentvalueontheservicelabel.
ADJ-C1RE
ADJ-C2RE
8)ExitfromServiceMode.
<In the case that the left margin is out of specification>
3)RemovepaperontheMultiPurposeTray.
4)OpentheMultiPurposeTrayintheconditionwherethe
MultiPurposeTraySubCoverisopened.
9
9-30
F-9-53
F-9-53
9-30