Service Mode; Service Mode Menu; Description Display Of Service Mode Item - Canon imageRUNNER ADVANCE C5045 Series Service Manual

1

Service Mode

It is possible to browse the usage method of service mode items in service mode.
Following is the changed and added items compared to a conventional machine.

Service mode menu

In the stanbay condition, press in this order: key -> 2+8 key -> key, and the
screen will switch as on the below:
TOP screen
[MODELIST] :
This mode is newly added from this machine.
This mode has the function to browse the usage method of service mode items etc.
New functions described later are available in MODELIST mode.
[MODELIST CLASSIC] :
This is the same mode with a conventional machine.
New functions described later are not available in MODELIST CLASSIC mode.
When [MODELIST] or [MODELIST CLASSIC] is pressed, initial screen of each mode is
displayed.
1

Description display of service mode item

Enables to display the description of initial screen, large category, middle category and small
category.
Select any from initial screen > large category > middle category > small category, and press [i]
(information button) so that the description of selected item (hereinafter called service mode
contents) is displayed.
e.g.) COPIER > DISPLAY > Version screen
F-1-12 F-1-12
•
Service mode contents can be displayed in J / E / F / I / G / S.
Alike other system software, service mode contents can be upgrade with SST.
•
1) Press [i]
4) A detailed explanation on the
item will be displayed (usage
scenarios, instructions,
settings range, etc.).
2) Minor item titles
are displayed.
3) Select the desired
minor item and
press [i]
1-14
F-1-13 F-1-13
1-14