Usb Device Information Content - Canon imageRUNNER ADVANCE C5045 Series Service Manual

2
5) When [OK] is shown on the status field, the status print is output. Check the contents of the
print.
Example of output result
********************************
*** USB Device report print ***
********************************
USB device information
T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver=2.00 Cls=00(>ifc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04bb ProdID=0c2a Rev=bb.03
S: Manifacturer=I-O DATA
S: Product=USB Flash Disk
S: SerialNumber=A0C0470407000073
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#= 0 Alt=0 #EPs=2 Cls=08(stor.) Sub=06 Prot=50 Driver=sub-storage
E: Ad=81(I) Atr=02(Bulk) MxPS=512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=512 Ivl=31875us
MEAP oreferred device information
AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3
AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3
AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3
Application ID Vendor ID
2
F-2-239
VID=04A9 PID=2680
VID=1234 PID=5678
VID=4321 PID=8765
Product ID
F-2-240

USB device information Content

Display the information of the USB device, which the device recognized.
If not displayed, there may be some fault occurred.
Some of standard optional devices are not displayed on a report.
The details of each item are as follows.
T : Topology
Internal hierarchical structure, which a USB device is connected, is shown. The number of a
connected bus, the hierarchical structure and connection speed can be indicated.
D : Device
Information of USB devices is shown.
P : Product
Product information of USB devices is shown. Vendor ID and Product ID can be recognized
here.
S : String
The character string embedded in a USB device is shown. A manufacture name and a
product name can be recognized here.
C : Configure
The configuration information of a USB device is shown. * mark is to know whether it is
active.
I : Interface
The interface information of a USB device is shown. Interface class and the driver to handle
can be recognized.
The value and the content of Driver are as follows.
Labeling
It is displayed when the USB system driver is assigned to the input device connected.
usbhid
usb-storage It is displayed when storage devices (USB memory storage etc.) are connected.
irda-usb IrDA It is displayed when the dongle is connected.
It is displayed when HUB is connected.
hub
It is displayed when the USB driver only for MEAP application is assigned to the input
gpusb
device connected.
It is displayed when a USB device, which specific vendor ID/ Product ID are
gpusbex
preferentially registered using a manifest and MEAP API, is connected and the USB
driver only for MEAP application is assigned.
2-148
Content
T-2-80
2-148