Changing Default System Manager Pin; Initial Display Languages Of Sms; Svga Support On Touch Panel (Local Ui) - Canon imageRUNNER ADVANCE C5045 Series Service Manual

2

Changing Default System Manager PIN

Conventionally, System Manager PIN was null in the factory setting, while this model sets the
default values at the factory shipment.
The default values are set as below:
: 7654321
System Manager ID
: 7654321
System PIN

SVGA Support on Touch Panel (Local UI)

Touch Panel now supports SVGA extended from VGA. The table below shows the major
specifications.
Conventional iR device
Touch Panel VGA
Color 8bit
Available Fonts 12/16dot
MEAP applications created on the VGA basis are shown in the center of screen, however,
this will not affect application's behaviors.
Example of Screen View
2
F-2-155 F-2-155
iRA device
SVGA ( 800 x 498）
Full color/24bit
12/16/18/24dot
T-2-62 T-2-62
F-2-156 F-2-156

Initial Display Languages of SMS

SMS supports English and Japanese. Display language can be changed with selecting by the
drop down list on a login page.
The initial display language at the time of accessing SMS depends on the setting.
In former SMS, the language setting of "initial setting/registration (user mode)" was used.
However, when the language setting is other than English or Japanese, it displays in English.
After changed, it will be as follows.
Start
Logged in by RLS
authentication.
No
Refer to the setting of the
Accept-Language header,
which a browser sends out.
Language priority
setting of a
browser
Refer to the setting of a language Except English or Japanese
displaying in registration/initial
setting [Additional Function].
Display setting
of a device
Except English or Japanese
Display in English.
When accessing by SMS Installer Service (Password Authentication)
It is referred in order of the language priority (setting of the Accept-Language header which a
browser sends out) and the display-language setting in the "user mode". When the language
setup is other than English or Japanese, it is displayed in English.
2-104
Refer to the value
Yes
of portalLang
stored in Cookie.
English or Japanese
Remote UI display
setup language
Except English or Japanese
English or Japanese
English or Japanese
Display in the
language configured.
2-104
F-2-157 F-2-157