MarginAdjustmentwithMultiPurposeTray(2ndside)
1)Make2-sidedcopyfromthemanualfeedtray,andcheckthattheleftmarginonthe2ndsideis2.5-/+2.0mm.
2) If the left margin is out of the specification, change the adjustment value for the left margin on the 2nd side from the Multi Purpose Tray.
COPIER>ADJUST>FEED-ADJ>ADJ-MFRE;1incrementofthevaluereducestheleftmarginby0.1mm.
3)Tomakethesettingvalueeffective,turnOFF/ONthemainpoweroftheHostMachine.
4)Writedownthenewadjustmentvalueontheservicelabel.
ADJ-MFRE
Lead-edgeMarginAdjustment(1stside)
1)Makecopyfromcassettte1,andcheckthat
thelead-edgemarginisL1=4.0+1.5/-1.0
mm.Ifthelead-edgemarginisoutofthe
specification, go through the following steps to
makeadjustment.
L1
Feeding direction
of paper
image
F-9-56
F-9-56
9
2)SelectthefollowinginServiceMode:COPIER>ADJUST>FEED-ADJ>REGIST
3)Changethesettingvaluetomakeadjustment(1incrementofthesettingvaluereducesthelead-
edgemarginby0.1mm)
4)Tomakethesettingvalueeffective,turnOFF/ONthemainpoweroftheHostMachine.
5)Writedownthenewadjustmentvalueontheservicelabel.
•
REGIST
9
9-32
9-32