Port Setup Procedure Of Https Server - Canon imageRUNNER ADVANCE C5045 Series Service Manual

2
5) Check to see that it is reflected in setting field, and turn off the main power, and then,
restart the device.

Port setup procedure of HTTPS Server

1) Startup level 2 of [SERVICE MODE] . The start procedure of [SERVICE MODE] level2 is as
follows.
1. Press [Settings /Registration] button n control panel.
2. Press [2] button and [8] button at the same time on control panel.
3. Press [Settings /Registration] button.
4. [SERVICE MODE] screen is displayed.
5. Press [Settings /Registration] button.
6. Press [2] button.
2) Press [COPIER] >[Option] > [NETWORK] buttons.
button until [MEAP-SSL] is shown on the screen. Press [MEAP-SSL]
3) Press or
button.
2
4) Press the port number to specify on the control panel (the numerical value input in the field
is displayed), and press [OK] button.
F-2-228
5) Check to see that it is reflected in setting field, and turn off the main power, and then,
restart the device.
F-2-229
2-144
F-2-230
F-2-231
2-144