2
3) Click [Password] to enter the password (4 to 12-digit), and then enter the password to
confirm the entry.
4) Click [OK] to start backup of TPM key.
5) Once the backup completion screen is shown, click [OK] and remove the USB
memory.
2
Caution:
Cause of backup failure
In the case of the following, a message is shown indicating backup failure and its
cause. Be sure to perform appropriate remedy.
•
USB memory is not connected
•
2 or more USB memories are connected
Memory capacity of USB memory is insufficient
•
Connected USB memory is read-only (writing is prohibited)
•
•
There is no key
Caution:
F-2-28
F-2-28
Storage of USB memory
Be sure to instruct the following points to the user.
•
The USB memory should be securely kept/managed.
Do not put the backup file of TPM key stored in the USB memory to any location
•
accessible by general public, such as on the server.
MEMO: Backup file name of TPM key
Serial No. is automatically given as the backup file name.
F-2-29
F-2-29
2-15
2-15