Fixing System Specifications; Major Parts Configuration - Canon imageRUNNER ADVANCE C5045 Series Service Manual

2
Specifications
Item
On-demand fixing
Fixing method
246 mm/s (1/1-speed, plain paper)
Fixing speed 51 / 45ppm
123 mm/s (1/2-speed, thick paper)
machine
82 mm/s (1/3-speed, coated paper, transparency)
160 mm/s (1/1-speed, plain paper)
35 / 30ppm
80 mm/s (1/2-speed, thick paper, coated paper, transparency)
machine
Heater Ceramic heater
Individual drive of Main Heater (heat-generation distribution:
high in center) / Sub Heater (heat-generation distribution: high in
edges).
Purpose: to control temperature rise at the edge
Control temperature Target temperature at printing (plain paper 1 (64 to 81 g/m
51 / 45 ppm machine: 169~180 deg C
35 / 30 ppm machine: 150~163 deg C
Temperature By the main thermistors (2pc) and the sub thermistors (2pc)
detection
Protection feature Thermistors
To block power supply to the fixing heater when a failure is
detected
Temperature fuse
Rated operation temperature: 228 +0/-6 deg C
2
Function/method
2
))
T-2-44 T-2-44

Major parts configuration

Pressure roller
Film unit
Shutter HP sensor
Fixing heater (H1)
(PS31)
Sub thermistor 2
(TH1)
Shutter position sensor
(PS32)
Temperature fuse
(TP1)
Main thermistor 2
(TH1)
Main thermistor 1
2-76
F-2-119 F-2-119
Main
thermistor 1
(TH1)
Fixing heater
(H1)
Main
thermistor 2
(TH1)
Fixing pressure
sensor (PS30)
Inner delivery
sensor (PS37)
(TH1)
Sub thermistor 1
(TH1)
F-2-120 F-2-120
2-76