Initializing The Password; Creating A Backup, Formatting The Hard Disk, Restoring With The Backup Data, Using The Sst; Procedure To Initialize The Sms Login Password - Canon imageRUNNER ADVANCE C5045 Series Service Manual

2

Initializing the Password

When a user forgets the password to log in to SMS, initialize it to the default value of
"MeapSmsLogin" using the switch license for initializing passwords.
Follow the steps below:

Procedure to initialize the SMS login password

1) Get the switch license for initializing the password.
Request the support of the regional headquarters of the Canon for switch license for
initializing the password presenting the device serial number.
2) Click [Login] button leaving Password field blank or entering incorrect password. The
Return to install Password Settings area appears. Click [Browse..] button and select the
switch license file prepared in advance.
3) When you click [Initialize] button, the confirmation message appears. Click [OK] button.
Then Login page opens. Enter the default password 'MeapSmsLogin' to log in. The
password is case-sensitive.
MEMO:
If you click [Cancel] button, the Login page opens without initializing the password.
2
Creating a Backup, Formatting the Hard Disk, Restoring
with the Backup data, Using the SST
Outline
This function aims to temporarily save MEAP application memory areas in HDD of the PC at
the time of HDD formatting.
You can back up the area of the HDD where MEAP applications reside to a PC, as when
you want to format the HDD. MEAP devices use a license-based mechanism to control
applications so that formatting the HDD will necessarily delete the jar files and application
data, requiring you to not only reinstall them but also make necessary settings. (Doing so
consists in obtaining special license files for reinstallation and downloading user data/settings,
increasing your work load.)
If you use the SST's backup function, you will be able to temporarily put aside the area of
MEAP applications, thus being free of the foregoing extra work. This function, however, is
limited to a specific MEAP device (serial number), and cannot be used for illegal copying of
applications.
You must not perform any other work (including checking operation) until the HDD has
been backed up. This arrangement is to prevent a mismatch of MEAP counter readings
and the HDD contents, and any fault in operation arising as the result of failure to
observe this will not be covered by the guarantee of operation.
MEMO:
The application that is installed with a reusable license can be reinstalled by using the
same license.
F-2-214 F-2-214
2-137
2-137