Show Captive-Portal Configuration Interface - Dell Networking 7048 Reference Manual

Configured Locales........................ 1
Authenticated Users....................... 0

show captive-portal configuration interface

Use the show captive-portal configuration interface command to display
information about all interfaces assigned to a captive portal configuration or
about a specific interface assigned to a captive portal configuration.
Syntax
show captive-portal configuration
unit/slot/port| tengigabitethernet unit/slot/port}]
cp-id —Captive Portal ID.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 interface
CP ID..................................... 1
CP Name................................... cp1
Interface
--------- ---------------------------------------- ------------ ---------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit - Level
console#show captive-portal configuration 1 interface 1/0/1
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/0/1
1392
Captive Portal Commands
Interface Description
cp-id
interface [{gigabitethernet
Operational Block
Status Status
Disabled Blocked