Set Call-Forward Id Codes For Voice Mail - Panasonic 524X07801B Technical Manual

Section 700 - Operation

Set Call-Forward ID Codes for Voice Mail

Description
(For a description of Call Forward ID codes for Voice Mail, see "Call Forward ID Code for Voice
Mail" on page 68.)
Voice Mail Call-Forward ID codes are used by voice mail systems to identify the correct mail box for
storing messages. The actual entry needed will vary by voice mail systems and configuration. Often
the entry is the extension number.
Operation
To set the Call Forward ID code:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 05.
3. Press the HOLD key.
4. Press the HOLD key.
5. Dial the extension number.
6. Press the HOLD key.
7. Enter the Call Forward ID code.
Notes: The ID code may contain up to 16 digits and contain
0, 1-9, *, #, pause (REDIAL key).
To clear an entry or any existing data, press the FLASH key.
8. Press the HOLD key to store the entry.
9. To set additional Call Forward ID codes, press the volume
up or down key or press the HOLD key to move to the
desired extension.
10. Repeat steps 7-9 until all Call Forward ID codes are set.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
576-13-700
Action
DBS 576 (USA), Revised 6/11/98
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8105-
C.FWD ID Code displays
CF ID-EXT Numbe displays
CF-ID EXT XXX displays (where
XXX = extension number)
Next extension number displays
Desired extension displays
CF ID-EXT Numbe displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
89