Set Call Forward Id Codes For Voice Mail - Panasonic S-ICX Technical Manual

Chapter 4. User Maintenance
10. To set Call Forward Busy destinations for additional
extensions, press the volume up and down key or press the
HOLD key to move to the desired Extension.
11. Repeat steps 9-11 until all extension are entered.
MEMORY
12. Press the
13. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Considerations
• N/A

Set Call Forward ID Codes for Voice Mail

Description
(For a description of Call Forward ID codes for Voice Mail, see "Call Forward ID Code for Voice
Mail" on page 68.)
Voice Mail Call-Forward ID codes are used by voice mail systems to identify the correct mail box for
storing messages. The actual entry needed will vary by voice mail systems and configuration. Often
the entry is the extension number.
Operation
To set the Call Forward ID code:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 05.
3. Press the HOLD key.
4. Press the HOLD key.
5. Dial the extension number.
6. Press the HOLD key.
78
Action
key to exit the entry mode.
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8105-
C.FWD ID Code displays
CF ID-EXT Number displays
CF-ID EXT XXX displays (where
XXX = extension number)
S-ICX-50-700