Table of Contents
Advertisement
4.1 Call Transfer Status
Use this feature to specify how the VPS should handle a call when a caller reaches
your extension. The following options are available: Call Blocking, Call Screening,
Intercom Paging, Calling a Beeper, or Disable All Transfer Services.
Subscriber's
Main Menu
Log into your
mailbox.
• The Intercom Paging feature is available only if you are using a Panasonic
KX-T series telephone system with APT/DPT Integration (see "APT
Integration" and "DPT Integration" in Glossary).
4.2 Covering Extension
The caller goes to the covering extension in 3 ways:
• One way is via the Automated Attendant Service when the Incomplete Call
Handling Status has enabled Covering Extension Transfer Status (see
4.3 Incomplete Call Handling Status).
• The second way is during a Personal Greeting announcement—if the caller
presses [0] while a Personal Greeting is being played, she is sent to the covering
extension or to an operator (if the covering extension is not specified).
• The third way is while recording a message—if the caller presses [0] while
leaving a message, she is sent to the covering extension or to an operator (if the
covering extension is not specified).
• To activate this feature, your System Administrator must assign a Covering
Extension to your mailbox.
4
1
Press 4.
Press 1.
To enable Call Blocking
1
To enable Call Screening
2
3
To enable Intercom Paging
4
To enable Beeper Access
5
To disable All Transfer Services
Follow the prompts
according to your needs.
Section 4
Special Features
On-hook.
23
Advertisement
Table of Contents
