Operation
Button Illumination
The sixth submenu displays the boot version:
The seventh submenu displays the application version:
Button Illumination
The last submenu displays the illumination setting:
The button at the far left indicates the low illumination level. The button to its right
indicates high-tally illumination.
The scroll buttons change the low illumination level up or down by 10%. The default level
for low illumination is 40%. The default level for high illumination is 100%.
Press the low illumination button to change the low illumination level. Press the high
illumination button to change the high illumination level. Press the scroll buttons at the
right to change the illumination level.
When you are satisfied with the illumination level you have chosen, press the menu button
once again. At this last step, the panel leaves menu mode and returns to normal mode.
Setup Mode
Setup mode occurs when the NV9605 is disconnected from its network and is freshly
powered up. In setup mode, you can set or change the panel ID, identify the software
version, and perform a test of the panel's buttons. It is in setup mode that you must initially
set the panel ID.
It can take several seconds for the buttons to appear.
The panel powers up with 1 button (here called the "setup" button) illuminated in green
and a display of the current panel ID. The panel ID is usually set to 0 at the factory:
44
B S V 0 6 3 9
0 1 0 0 0 0
A S V 0 0 0 0
0 0 0 0 0 0
I l l u m L o
A C Q I P
0
Up 10%
Down 10%
Setup button